Skim coating means applying a thin layer of joint compound or plaster to your walls. There are lots of different tools you can use to skim coat.
The Complete Guide to Finishing Walls & Ceilings: Includes Plaster, Skim- coating And Texture Ceiling Finishes (Black & Decker Complete Guide) [Tom Lemmer] …
Skim-coating is the technique of applying thin layers of gypsum-based joint compound over the entire surface. The layers are so thin that even after applying several coats, the total thickness of all the layers together is less than an eighth of an inch. Skim-coating can also be used to smooth a textured surface.
How to Skim Coat Walls. Step 1: Start by prepping the walls. Photo 1: Prime the walls. Roll a fast-drying, stain-sealing drywall primer on the walls. Step 2: Roll on the mud. Photo 2: Roll on the mud. Step 3: Wipe it smooth. Photo 3: Trowel the first coat. Step 4: Apply one or two more layers. Photo 6: Change …
Spread a skim coat with a trowel or drywall knife over a rough wall or ceiling to … finish broken plaster or a plaster-sheetrock joint; or perhaps you plan to repair …
Pictures and instructions for applying a skim coat of joint compound on walls and … This would include any water-damaged plaster or drywall, and very rough …
You trowel the mud on with a drywall knife or roll it with a roller and then immediately scrape the wall with the knife, leaving only a smooth layer behind. Skim coating works best if done in thin layers, so if the wall is lumpy or has an existing rough texture, it may take more than one skim coat to flatten it.