You don't have to tear down plaster walls to insulate an old house. … they can make a mess of your newly installed insulation over the years.
There is zero insulation in the walls. The walls have the original lath and plaster with 1/2″ drywall over that. I really don't want to tear all that …
Some old-house experts have told me over the years that thick plaster walls and the wood lath underneath are thicker than most drywall.
Just blowing insulation into the walls can create moisture problems that will rot the … post-and-beam homes used straw infill as insulation and a lime-based plaster … the outside, blowing in cellulose, plugging the holes, and painting over it all.
Old houses with plaster walls have no vapor barrier under the plaster to stop moist air from saturating the insulation. Instead, plaster walls are designed to allow the free exchange of air and moisture.
Insulating plaster walls is tricky work, so you'll want plaster and insulation professionals on the job. … Adding insulation in plaster walls with a brick exterior can be a challenge, especially if there are … Should I Paint Over Damaged Plaster?
Q. We have an 80-year-old home with lathe and plaster on the inside walls. The house is hard to heat in the winter and becomes very hot in the …
I would like to either place rigid insulation over the entire exterior walls or frame a wall in front of the plaster wall and use batt insulation. This is …
In old houses with plaster walls, there is no vapor barrier under the plaster … insulation and over 80% of them have this wet insulation problem.